Ed Santana, Modern Wall Systems, EIFS Wall Systems Specialist (Modern Wall Systems) Services for Real Estate Pros



Ed Santana
Modern Wall Systems, EIFS Wall Systems Specialist
location_on Virginia Beach, VA — Modern Wall Systems
Get to Know Ed Santana

Our Water Infiltration Analysis service provides moisture analysis of any structure with EIFS or Stucco cladding. The purpose of this inspection is to find excessive moisture content in the structural cavities and framing. Using industry standard inspection techniques and our high-resolutionEIFS Wall Systems infrared thermography, we can identify sources of moisture intrusion. The observations are all documented in a detailed written and photographic report.

Third Party Inspections

EIFS Wall Systems Inspection Kit

Modern Wall Systems

This service is required on all field-applied EIFS installations of 10,000 SF or larger by the Building Officials Code Administrators International (BOCA Model Code).

Pre-Purchase Inspections

Pre-Purchase Inspection services are provided to owners, appraisers, and relocation services to ascertain that the EIFS is installed according to the system manufacturers.

Construction Inspections

Our Construction Inspection services are provided for all commercial and residential EIFS applications. We are available for nationwide travel to your site.

To schedule or learn more about any of these services, please use our online form to contact us or call today at (757) 757-748-5052.

Mold may be getting all the attention at the moment as a major threat to insurers, at least in Virginia, Texas, Florida, and California, but another problem has wreaked havoc for homeowners, insurance carriers, and contractors nationwide for several years now–damages stemming from Exterior Insulation and Finishing Systems (EIFS), often referred to as fake or synthetic stucco.

EIFS wall systems are exterior cladding systems used on both commercial and residential structures. Typically, EIFS consist of an exterior finish, a reinforcing mesh, an insulator such as polystyrene, an adhesive to bind the insulator to the building, and foam board attached to the building itself. These systems have been touted as energy-efficient and flexible enough to accommodate myriad building and home designs.

EIFS has been in use for quite some time. Developed in Europe to repair buildings after World War II, the finishing system was first used in the U.S. by Dryvit in 1969, for commercial structures. In the 1980s, the residential construction industry began using EIFS, and since its introduction, homeowners from North and South Carolina to Alabama to California and Washington have reported property damage due to moisture. Homeowners in states with humid climates have been most prone to EIFS-related damages.

Problems arise when moisture is retained between the sheathing of a house and the foam board component of the finish system. Over time, the house’s sheathing may rot, and attract termites. In addition, where there’s moisture, there’s always the potential for mold to develop. About 30 manufacturers in the U.S. make EIFS. EIFS is used in only 2 percent of the residential construction market. These systems have been applied in the United States and Canada for over 25 years and continue to grow in popularity. Currently, approximately 285 million square feet are applied annually, and the market continues to grow about 12 percent a year.

The problem is that the Styrofoam-type material does not breathe, and if it’s not properly installed—and that’s the critical issue–moisture can get trapped and cause sheathing damage. Some people would assert that even if it is properly installed, the design itself inherently causes moisture in a moist climate. Property damage related to EIFS wall systems has proved a highly litigious issue: The first class action suit against EIFS manufacturers was brought in North Carolina in 1995.

» back to top

How do I know it is done right ?

It is recommended by many manufacturers to have an independent inspection during the installation of EIFS. A trained, knowledgeable inspector understands the proper installation of EIFS and is a valuable person to have by your side to ensure a quality project. Reputable contractors do not want problems down the road and welcome independent inspections. Modern Wall Systems provides third party inspections. Call Toll-Free on (757) 748-5052 to learn more.

Why do EIFS wall systems sometimes fail ?

  • EIFS is a multi-component system, which potentially involves many different trades if it is to be installed correctly–namely, installers, roofers, framers, general contractors, painters, etc.;
  • Manufacturers in the past sold EIFS as a low or no maintenance product. Nothing could be further from the truth. EIFS is a complex, unforgiving, and extremely high maintenance cladding;
  • Many systems were installed without proper kick out flashing at roof wall intersections, and the absence of sill, header, and pan flashing at windows;
  • Inadequate sealant joints around windows and doors, and other locations where synthetic stucco meets dissimilar materials such as wood; the absence of backer rods where there are sealant joints; the absence of sufficient caulking or sealant in these areas; the absence of sealants at penetrations where gutters, downspouts, and other fixtures are attached to the house;
  • Insufficient thickness of the base coat. Base coat thickness is required to be at least one sixteenth of an inch;
  • Inadequate back wrapping;
  • The absence of a moisture barrier on the sheathing;
  • Improper application of the foam panels, resulting in delamination and cracks, through which water intrudes;
  • Absence of rough opening flashing around the windows, to permit the EPS board to be adhered to the sheathing directly;
  • Bringing the synthetic stucco into the ground, providing a ready route for termites;
  • Using the wrong kind of adhesion, or applying adhesives incorrectly, resulting in delamination, cracks, and moisture intrusion; misapplication of the mechanical fasteners which adhere the foam to the sheathing.

Modern Wall Systems is a full-service contractor that can essentially assist clients from the conception to completion of their projects. Our services include:



Scheduling Phasing plans Estimating Budgeting/cost-modeling Regulatory investigation Zoning and code compliance Bid packaging Value engineering Subcontractor pre-qualification Status reporting



Scheduling Self-performing concrete Quality control Safety management Subcontractor management Status reporting Change management



Certificate of occupancy As-built documentation Commissioning/Warranty programs Moving services Building Operations



Proforma review Land acquisition Feasibility studies Pre-development financing Financing Leasing


Delivery Methods On Point Consulting builds a diverse range of projects for both public and private clients under a variety of project delivery methods, including:

Lump Sum bid from completed drawings Construction Manager (CM) Agency Construction Manager (CM) Construction Manager (CM) at Risk Design-Build Cost Plus Fixed Fee (CPFF) for government projects Preconstruction Services


Full service specialty contractor specializing in EIFS, Stucco, stone veneer systems, metal framing, hanging and finishing sheetrock.